SB02 Vertical Stiffness (2015-08-19)

Freefly recommends ALTA operators to start tuning with a the Vertical Stiffness value set to 12 when tuning.


Additionally, until SYNAPSE firmware is revised to version 3.3.0, do not use the Default Config feature in the ALTA App.


Affected ALTAs without the SB performed are suitable for flight, but caution should be used in Height and Position modes for vertical
oscillation.

 

See attached PDF for full details about this service bulletin. 

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments