SB08 Motion Booting (2015-10-21)

It was recently discovered that through the process of upgrading Synapse firmware from 3.02 to 3.4, the Motion Booting parameter can be set to ON. This update was occurring in the factory for certain ALTAs shipped with Synapse firmware 3.02 causing the Motion Booting parameter to be set to ON when shipped. Freefly recommends that this is setting be turned off under normal conditions since it bypasses error checking processes.

 

See attached PDF for full details about this service bulletin. 

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments