How do I power my MIMIC Beta?

To power on the MIMIC

  • Plug in the attached USB cable into a 5V, USB power source. We have provided a small USB battery with the MIMIC Beta kit, and most any USB battery will work.
  • As soon as power is supplied via the USB cable, the MIMIC will turn on.

Alternately, you can power the MIMIC Beta with the supplied USB cable plugged into the battery plate on our V-Lock Handlebar Adapter Kit.

 

NOTE: When applying power to the MIMIC Beta, ensure you do not depress the Pan Freeze button while the MIMIC Beta is first turning on. Doing so will require a power cycle of the MIMIC Beta. Also, keep the MIMIC Beta handlebar still during the boot sequence. It is best to set it down for 18-25 seconds after powering it, to ensure the initialization is not interrupted. 

 

To charge the USB battery, plug the included charge cable into the micro-USB charge port on the USB battery, then plug the cable into a USB outlet to charge.

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments