I can see MōVI telemetry, but I cannot control the MōVI

You can be bound to the receiver and see the MōVI telemetry without being able to control the gimbal. This could be due to that the transmitter is in kill mode, the stiffness settings are at zero, or the MōVI doesn't have the Radio Type set to MōVI Controller.

To set the MōVI radio type to MōVI controller:

1. Turn on your MōVI.

2. Connect to the MōVI with your computer/Android device.

3. Change the following setting: Configuration::Remote Controller Config::Radio Type::MōVI Controller.

4. From the System menu, Write Settings 


You should now have control over the gimbal and the settings menus in the controller. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request