How do I connect my Freefly battery to the charger?

Charging the battery for the MōVI M5

  1. Insert the AC power cord into the charger.
  2. Insert the AC power cord into the wall socket. All LEDs will light for 1 second and the charge status LED will flash green, which indicates the charger is ready to charge.
  3. Select “LiPo” on the battery type switch.
  4. Select the “1A” charging current on the charge current switch when charging the included batteries.
  5. Connect battery main charge lead to the charge lead input in the front of the charger. Make sure the red plug is plugged into the red charge socket and the black plug is plugged into the black charge socket.
  6. Connect the Freefly 4s 1.3Ah battery to the charge lead.
  7. Connect the battery balance lead to the “4S” balance socket on the side of the charger (keyed side facing up). The charger will automatically start charging.
  8. The charge status LED and the cell status LED will light constant red (the cell 1-4 LED’s will glow continuously indicating a 4 cell battery pack).
  9. When the battery is fully charged, the “charge status” LED will glow constant green.
  10. Unplug the battery from the balance port and charge lead. The battery is ready for use in your MōVI M5.

 Please note: Not following the procedure may cause a battery fire if connections are not connected properly.

 

Charging the Battery for the MōVI M10 & M15

  1. Insert the AC power cord into the charger.
  2. Insert the AC power cord into the wall socket. All LEDs will light for 1 second and the charge status LED will flash green, which indicates the charger is ready to charge.
  3. Select “LiPo” on the battery type switch.
  4. Select the “3A” charging current on the charge current switch when charging the included batteries.
  5. Connect battery main charge lead to the charge lead input in the front of the charger. Make sure the red plug is plugged into the red charge socket and the black plug is plugged into the black charge socket.
  6. Connect the Freefly 4s 2.6Ah battery to the charge lead. 
  7. Connect the battery balance lead to the “4S” balance socket on the side of the charger (keyed side facing up). The charger will automatically start charging.
  8. The charge status LED and the cell status LED will light constant red (the cell 1-4 LED’s will glow continuously indicating a 4 cell battery pack).
  9. When the battery is fully charged, the “charge status” LED will glow constant green.
  10. Unplug the battery from the balance port and charge lead. The battery is ready for use in your MōVI M10 or M15.

Please note: Not following the procedure may cause a battery fire if connections are not connected properly.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments