How do I rebind the Spektrum DX7s/DX8 transmitter to the MōVI?

Step-by-Step Instructions for “Binding” Spektrum DX7s/DX8 Transmitter to your MōVI.

A few things to keep in mind before starting; first, make sure you do not have the MōVI on a reflective surface, such as a glass or marble counter. Second, you must be 2-3 feet away from the MōVI when doing this step-by-step process.

 

If you haven't already 'Paired' your PC to the MōVI, follow the instructions below.

 

 pairing_1.jpg

 

1. Open the Freefly Configurator software and connect to your MōVI.

 

pairing_2.jpg

 

 

 

 

2. Click on 'CONFIGURATION' and the Configurator window will appear.

 

pairing_3.jpg

 

 

 

3. Click on the 'System' menu and a drop down menu will appear.  Select 'Bind Radio'.

 pairing_4.jpg

 

 

4. The Configurator software will instruct you to turn off and on again. The image below shows the  power button on the back of your MōVI.

 

pairing_5.jpg

 

 

5. When you turn the unit back on you will see the receiver light blink very fast.

 

pairing_6.jpg

 

6. Now, with your transmitter,  hold down the 'BIND' button at the same time you turn on the power button.

 

pairing_7.jpg

 

7  7. After a few seconds the screen will show that the 'Binding' process has started.

 

pairing_8.jpg

 

 

8.  At this point you can let go of the buttons on the transmitter and watch the process finish on its own.

pairing_9.jpg 

 

9. The binding is complete when you see the screen below.

 

pairing_10.jpg

 

                                                                 

 

10. To verify that the transmitter is communicating with  the MōVI, move the Pan/Tilt

stick on the transmitter and confirm that the gimbal is moving.

pairing_11.jpg 

 

Note: On rare occasions this process may have to be done 1-2 more times to establish a solid communication between the transmitter and the MōVI.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments