How do I mount my camera on the MōVI M10?

This topic is available as a video tutorial here: MōVI Tutorials - Mounting Camera from Freefly on Vimeo.

 

The MōVI uses a custom lightweight adjustable camera plate to allow you to easily balance, install, and remove your camera package. It is important that you fully build your camera package prior to installing it on the M10. Adding accessories after balancing the M10 would necessitate re-balancing, so it is best to install all accessories (follow focus motors, receivers, batteries, etc.) prior to mounting the camera to the MōVI. 

 

1.  Attach the camera plate to your camera using the provided 1/4 - 20 screw. Please note that there are multiple attachment holes in the camera rail to choose from to cater to different camera layouts.

 

Screen_Shot_2013-09-18_at_7.21.58_PM.png

2.  Install the M3x8 screw in the front of the camera rail. This will prevent the plate from inadvertently sliding off the back of the adjustable mount. 

Screen_Shot_2013-09-18_at_7.24.28_PM.png

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments